Truck Tool Box Modifications

Truck Tool Box Modifications

If you regularly work with tools, you know that it is not easy to keep them organized. A truck toolbox helps you keep your tools organized. Your truck toolbox is probably designed for your particular vehicle, but it is still a challenge to keep all your tools organized. In this post, we are going to provide some ideas for truck tool box modifications. We hope you will find them helpful. 

What if you do not have to think of modifications in the first place? You may not have to think of modifications if you have the right truck toolbox. . But choosing a toolbox is harder than it sounds. Here are some of the best toolbox reviews that will help you make an informed decision. Learn about different toolboxes before you choose one.

Separating

When it comes to organizing your tools in your truck toolbox, separating is a very useful idea. The idea is to keep some tools at the top and some at the bottom. The tools that are frequently used should go at the top. 

There are some tools that you almost never use. Put those tools at the bottom. If the frequently used tools are at the top layer, you will find them easily. This is a systematic way to know precisely where you will find the tool. This is a very common technique used by Master mechanics. 

Piling

Clams and other troublesome tools may not properly fit in your toolbox. If it is a small box, fitting your tools is even harder. By putting your tools in particular spots, you can make them more easily available. 

Erect some dividing lines in your toolbox. Thus you can fit in many different sizes of clamps. If you organize them in this way, they will look neater. 

Use Some Magnetized Tool Holders

If you are looking for some ideas for truck tool box modifications, here is another great idea for you. Setting up a magnetized toolbox is one of the best ways to organize your tools. The mechanism of this holder is simple. It is basically a collection of magnets that keep your tools in place.

 

No matter how many devices you have, you will not have to worry about losing them. Whenever you need a tool, you will know exactly where it is. Magnetized toolboxes are pretty affordable.

Cut Finger Holes

You may find it hard to pick up a tool if it fits snugly. Around a tool, make sure there is not too much space. If there is much space, the tools may slide around. To fix this issue, cut a semi-circle that holds the handle of each tool.

You can use a knife to cut this circle, but a hole punch will make the job a lot easier. For truck tool box modifications, a hole punch is one of the most useful tools. The tool is similar to the one you use to cut circles in leather, plastic, and wood. To make sure the tool is easy to pick up; you have to put the hole in a logical place.

Put Relatively Small Tools Close Together

Foam sheets can help you with organizing small tools. You may need to put the tools in a drawer if you do not use foam sheets. When you use foam and arrange the tools neatly, you can find a particular tool without handling the ones you are not looking for. This is a very useful method for organizing DIY wrench, sockets, and screwdrivers.

You can save lots of space by laying your tools on foam sheets. You can put them like puzzle pieces or next to one another. Try several layouts before you choose a particular layout.

Save Space By Alternating Handle Directions

You can maximize space by alternating the directions of your tools. This method is useful especially for organizing small tools. It can help you easily organize screwdrivers and pliers. But make sure that everything is not crammed into a drawer. It may not make sense for you. It is good to create a layout before you organize your tools.

Use Thick Foam

Consider using thicker foam for drills and other large tools. However, for small tools, feel free to use foam tool kits. In the deep drawers, put thick foam. Make sure that the tools are not too low in your drawers. You can make thick foam by gluing thin foam sheets together. Thick foam can protect larger tools from damage.

Use A Retractable Blade To Cut Thick Foam

Use a retractable blade if you want to cut out the thick foam precisely. Before you get started, the blade should be measured against the object. The depth of your object should match the blade depth. Remove a layer of the foam if it sticks out on top. When cutting the foam, be conservative. Make sure you do not cut too much of the foam.

Cut Shapes in Sections

Some tools have weird shapes. For these tools, do not cut out the entire foam. Rather, cut it in sections. This is particularly useful when you have to cut a large shape. If the shape is complex and intricate, make sure you do not tear the shape.

Cut small sections when you are getting started. Then move slowly so that you do not ruin the shape. Do not remove it too quickly, because you may end up damaging the shape.

Make a Wrench Organizer

Making an upright wrench organizer is a great way to save some space in your toolbox. For wrenches and other small tools, it works very well. In this organizer, you can store both your standard and metric wrenches. This is an easy-to-implement idea for truck tool box modifications.

Measure both your tools and your tool drawer. Then you have to take strips of foam and measure them. Make sure that they are the same length as your drawer. For a drawer that is 15 inches wide and 3 inches deep, the strips should be 3″x 15″.

Color Coordinate

Use different colors if you need to use multiple types of tools in your drawer. Each section should contain a certain type of tool, and the section should be marked with a certain color. For pliers, use black foam. For screwdrivers, use blue foam. If a certain tool is missing from your drawer, you will instantly recognize it.

Custom Drawer Inserts

To carve out spaces, a plunge router is not necessary. You can use your Dremel rotary tool for this purpose. So, it is not just a foam cutting tool. If you need to curve into sheets that are thick, it can be useful. To do it, in your Dremel, you may need to install a bit. To get the shape, curve slowly. As you go along, the tool will fit the shape.

Add Labels

To highlight missing tools, use bright colored foam. It will help you know where the tools actually belong. Should you write something on the labels? Well, you can write the names of the particular tools on the small labels. It will make it easy for you to return and find the tools easily and quickly. You can place the labels on the outside of tool chests and tool drawers.

Conclusions

We have discussed some easy-to-implement ideas. If you don’t know how to install a truck toolbox, I advise you to watch a tutorial video. But if you have a truck toolbox, you have to realize the fact that there is no rule for truck tool box modifications. It depends on the type of tools and toolbox you have. However, we hope you will find these ideas helpful.

About the Author

Garage Gear Guru is devoted to providing you with the BEST information to help you transform your garage into the place it's meant to be.

Leave a Reply 0 comments